Axel AX3000 80 User Manual

Appendix
186 AX3000 Models 80 and 85 - User's Manual
The following appendices give information about:
A.1 - Using the AX3000 interactive set-up
A.2 - Network overview (Ethernet address, IP address and routers)
A.3 - DHCP protocol
A.4 - DNS protocol
A.5 - Axel DHCP Option
A.6 - Administration command list
A.7 - Going further...
A.8 - Hardware and firmware information
A.1 - USING THE INTERACTIVE SET-UP
A.1.1 - Entering the Set-Up
The following can be used to enter the AX3000 interactive set-up:
- Using <Ctrl><Alt><Esc> from the thin client
- Using the AxRM remote control command. See Chapters 10.1 and 10.2.
- Using Telnet to access the thin client remotely. See Chapter 10.3.
Note: the set-up can be password-protected, in which case the password must be entered to
access the quick set-up dialog box. For more information, see Chapter 3.2.8.
A.1.2 - Navigation
The AX3000 set-up comprises a horizontal general menu, with drop down vertical menus.
The mouse cannot be used within the telnet session.
A help line is located in the bottom of the screen.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English