Installing under UNIX/LINUX
154 AX3000 Models 80 and 85 - User's Manual
a) Emulation Additional Parameters
The following box is displayed:
These parameters are:
- Character Set: the available character sets depend on which emulation is selected.
- Vertical Scrolling: whether the AX3000 display scrolls, when the cursor is moved down
passed the bottom of the screen:
- Yes: the display scrolls up
- No: the cursor re-appears on the first (top) line.
- Wrap: behavior of the AX3000 when the cursor reaches the last column of the screen:
- Yes: the next characters wrap round onto the start of the next line
- No: each new character overwrites the last character on the line.
- CR=CR+LF: AX3000 behavior when 0x0Dh is received:
- Yes: 0x0D is mapped to 0x0D and 0x0A
- No: no specific processing is done
- Cursor Shape: Line, Half-Block and Block.
- Cursor Style: Blinking or Steady.
- Attributes Mode: VGA monitor mode. The two values are "color" and "monochrome" (which
allows underline attribute to be displayed).
- Enhanced Mode: enable or disable the display of double-size characters or color underline
attribute.
- Blink Allowed: if blink attribute is disabled, 16 background colors can be used (instead of
the 8 normally available).
- Ignore Blank Atb (WYSE emulation only): if 'yes', the blank attribute is not processed
(example: normal+blank=normal).
- End Sequence: to stop transparent printing mode
- Coding: two keyboard modes are available (ASCII and scancode).
- CAPS Key Mode : set the CAPS LOCK to behave in either of three ways:
- Caps Lock: each alphabetical key sends the corresponding upper case letter. To
unlock this mode press the <CAPS> key.
- Shift Lock: each key send the same character sent by pressing <Shift><This key>. To
unlock this mode press a <Shift> key.
- Uppercase: each key send the upper character if it is present. Otherwise, this is the
lower character (upper-case letter if possible) which is sent. <Shift> key acts in the
standard way (whatever the CAPS key). To unlock this mode press the <CAPS> key.
- Caps Lock +: same as 'Shift Lock'. But in addition ALL the keys supported (including
<Esc>, function keys...).