Installing under OS/400
AX3000 Models 80 and 85 - User's Manual 121
- Caps Lock +: same as 'Shift Lock'. But in addition ALL the keys supported (including
<Esc>, function keys...).
- Euro Coding: Euro symbol support. The three possible values are:
- No: no specific processing is done
- Standard: the Euro symbol replaces the international currency symbol '¤' within the
current character set.
- Custom: any character can be replaced by the Euro symbol within the current
character set (use the decimal notation).
-
<Scroll Lo
ck> & <Pause>:
enable or disable these two keys - <.> (numpad): the two available values are the dot (.) and the comma (,).
- Backspace Mode: the two available values are:
- Standard: move cursor left
- Suppress: deleting the character on the left of the cursor location
- Column Separator: the two possible values are:
- No: this video attribute is not displayed.
- Yes: this video attribute is displayed, but due to VGA limitations, it is displayed as
underlining.
- Rulers Style: the "rule" function allows the cursor to be located easily among other
characters. Three types of rules are available:
- Cross: a horizontal line and a vertical line indicate the cursor location,
- Horizontal: a horizontal line is displayed at the cursor line,
- Vertical: a vertical line is displayed at the cursor column.
Press
<Rule
>
(
or
<Alt
Gr
><F12>
with
a
PC
k
eyboard)
to
en
able/disable
the
rule
function
from a 5250 session.
- Behavior: two values: Follows the cursor / Fixed
- Mouse Allowed: enable/disable the mouse within this session
- Local Windowing: this parameter sets the window display mode. Two values:
- No: windows are displayed with the original characters ('.' and ':'),
- Yes: windows are displayed with "real" frames.
- Transparent Mode: this mode allows ASCII data to be sent to auxiliary ports (serial,
parallel…). The possible values are:
- No
- Yes: data can be encoded in decimal and hexadecimal notations
- Yes, hexa: data is encoded only in hexadecimal notation.
- On/Off ASCII Sequence: start and stop transparent mode sequence. For more information
see Chapter 6.2.5.
- Cell Delimited: Cut & Paste behavior.
b) Remapping 5250 Functions to any PC Keyboard keys
This allows any key to be remapped to any 5250 function and/or character string.
To Next Page
Loading...
Need help?
General
