Axel AX3000 80 User Manual

Tools and Statistics
AX3000 Models 80 and 85 - User's Manual 171
Select the [Upgrade]-[Config File]-[USB to Terminal] menu from the AX3000 set-up. The
following box is displayed:
The configuration filename can be manually entered or located with the [File Explorer] button.
Click the [Transfer] button to launch the operation.
IMPORTANT: the thin client will automatically reboot after this operation.
9.2 - UPDATING THE FIRMWARE
The thin client firmware can be updated. This can be done:
- Remotely with the AxRM software. See Chapter 10.
- From a USB memstick.
- With the bootp/tftp protocol.
All Axel products have an ‘FK’ (Firmware key) number. It is important that the firmware file and
Axel hardware have the same FK number. If not the update will fail.
9.2.1 - From a MemStick
Select the [Upgrade]-[Firmware]-[Update from USB] menu from the AX3000 set-up. The
following box is displayed:
When 'Archiving the configuration' option is selected, before the firmware upgrade, the
configuration file will be stored at the memstick root (the filename is the thin client MAC address).
The firmware filename can be manually entered or located with the [File Explorer] button.
Click the [Transfer] button to launch the operation.
IMPORTANT: the thin client will automatically reboot after this operation.
The configuration is not sent automatically to the thin client after the firmware update.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English