Axel AX3000 80 User Manual

Installing under OS/400
AX3000 Models 80 and 85 - User's Manual 131
These parameters are:
- Server: selected from the server table (see Chapter 3.1.4). A new server can be added by
selecting 'IP address' or 'Server Name'.
- Enhanced Parameters: See next sub-chapter.
- Printer Name (DEVNAME): printer device name.
- Queue for Writer Messages (MSGQNAME): message queue name to which the printer
messages will be sent.
- MSGQNAME Library (MSGQLIB): associate message queue library.
- Font Identifier (FONT): font number (3, 4 or 5 digits).
- Host Print Transform (TRANSFORM): always 'yes'.
- Manufacturer Type and Model (MFRTYPMDL): enter the printer driver name (ex: *NONE,
*HP4, *NECP2...).
- Paper Source 1 (PPRSRC1): selected through list.
- Paper Source 2 (PPRSRC2): selected through list.
- Envelope hopper (ENVELOPE): describes the paper source 3 (selection through list).
- ASCII 899 support (ASCII899): specifies if the code page ASCII 899 is supported by the
printer.
- WSCST name (WSCSTNAME): qualified name of the customizing object.
- WSCST library (WSCSTLIB): associated library.
Note: if the auxiliary port used for printing is a serial port, set the 'Printer' operating mode and set
the associated parameters (baud rate, handshake, etc).
b) Enhanced Parameters
The following dialog box is displayed:
These parameters are:
- TCP Port: OS/400 telnet port. Generally 23.
- TERM Value: do not change.
- Auto-Connection: if this parameter is set to 'yes', the connection will be automatically
established when the AX3000 is powered. Otherwise, the user can press <Alt><Fx> to
establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is automatically
established after a disconnection. Otherwise, the user can press <Alt><Fx> to establish a
new connection.
- Enhanced Parameters: see Appendix A.7.3.
- Transparent Mode: this mode allows ASCII data to be sent to printer session port. The
possible values are:
- No
- Yes: data can be encoded in decimal and hexadecimal notations
- Yes, hexa: data is encoded only in hexadecimal notation.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English