Interactive Set-Up
24 AX3000 Models 80 and 85 - User's Manual
This chapter describes the thin client installation using the interactive set-up procedure.
The following can be used to enter the thin client interactive set-up:
- Using <Ctrl><Alt><Esc> from the thin client
- Using Remote Control from AxRM. (See Chapters 10.1 and 10.2)
- Using Telnet from another terminal/PC. (See Chapter 10.3)
If the set-up is password protected, the following dialog box will be displayed the next time access
is attempted:
Three operations are permitted:
- Enter the password to access the set-up
- Press <Esc> or select the [Cancel] button to exit set-up mode
- Select the [Consult] button to access the set-up without using the password. All set-up
operations will be permitted but it will not be possible to save the modifications.
The Consultation mode is not offered if the "Administrator Hot Key disabled" option is set to
"No". (See Appendix A.7.2)
IMPORTANT: if the password is not known, the super password 'yaka' can be used. (Only from the
local interactive set-up and only if "Administrator Hot Key disabled" is set to "No". See Appendix
A.7.2)
Note: the following keystrokes are available in the set-up (for more information see Appendix A.1):
- <Enter>: if the current field is a button perform a click. Else jump to the 'default' button of the
box ([OK], [Next]…)
- <Spacebar>: click button, toggle yes/no and open a list
- <Esc>: cancel current field or select [Cancel] button
- <F10>: select the 'default' button. Or, if this button is already selected, perform the
associated action.
- <Tab> or <>: next field
- <Shift><Tab> or <>: previous field
- <Ctrl><C>: copy a character string or session settings
- <Ctrl><V>: paste information