Interactive Set-Up
AX3000 Models 80 and 85 - User's Manual 35
To configure the server table, select the [Configuration]-[Network]-[Servers] menu. A dialog box
as shown below is displayed:
The server definition depends on whether DNS is used:
- No DNS: a server is identified by both an alphanumeric character string and an IP address.
(AS400 in the example)
- With DNS: a server is defined only by its name. This name can be either a full name
(w2k8r2.paris.axel.fr) or an incomplete name (Linux). Its IP address is resolved later. (See
Appendix A.4)
Add a Server: move the highlight cursor to a vacant line and enter the name and either its IP
address or DNS name. (A server can also be added from the session profile dialog box.)
Delete a Server: select the server and press [Delete].
Change a Server: move the highlight cursor over the name or IP address of the server and enter
the new value.
Note: the default DNS domains, previously defined through the DNS box are displayed for
information (they can't be modified).