Barco RLM series - Pip Window Size, Write

3. Advanced Commands
for composite video:
Byte value Mode
0
Video BNC
1
Vertical sync BNC
2
Red BNC
3
Green BNC
4
Blue BNC
5
SVideo Y
6
SVideo C
for Svideo:
Byte value Mode
100
SVideo 1
101
SVideo on R & B
102
SVideo on Vs and Video BNC
Data[2], Data[3] = Xsize word
Data[4], Data[5] = Ysize word
Data[6], Data[7] = Xposition word
Data[8], Data[9] = Yposition word
Xsize, Ysize, Xpos, Ypos are given in “pixels”
for a graphics projector version : x = 1 ...1024 ; y = 1..768
Note that the panel size (projector version) can be read using the Panel size command, " Panel size , Read ",
page 159
Xsize and Ysize determine the size of the window, since the aspect ratio is fixed , one of the values may be
sufficient to determine the siz e of the window.
If the 2 values d o not match the aspect ratio, then Xsize is taken as reference and Ysize is calculated to match
the aspect ratio.
Data[10] = byPriority byte: 0 =Top ;...; 3= Bottom
3.2.16 PiP window size, Write
Description
Resizes the active window (works in PiP and in Full Screen mode) by keeping the same aspect ratio.
102
R5976884 RLM SERIES 04/04/2006