Barco RLM series - Lamp Commands; Lamp Mode, Write

2. Basic Commands
Receive (acknowledge)
Checksum
\x07
Stop
\xff
Receive (awnser)
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x50
Data[0]
\x00
Data[1]
\x00
Checksum
\x72
Stop
\xff
2.30 Lamp commands
Overview
• Lamp Mode, Write
• Lamp Mode, Read
• Lamp Status, Read
• Lamp Warning, Read
• Lamp runtime, Read
• Lamps Serial number, Read
2.30.1 Lamp Mode, Write
Description
Writes the Lamp mode to the projector
Command
Command [0]
\x20
Command [1]
\x0c
Data
Data[0]: unsigned byte
data byte value: 0 = Single m od e ; 1= Dual mode
Example
Write the mode \x00( single mode) to the projector
Transmit
Start
\xfe
Projector address
\x01
62 R5976884 RLM SERIES 04/04/2006