Barco RLM series - Image Files Settings, Write

3. Advanced Commands
Send Data
strFilenameFrom
strFilenameTo
strFilenameFro m and strFilenameTo are strings of the C-string type."Syntax", p ag e 9
3.31.5 Image files settings, Write
Description
These commands set the image files characterisitics
Commands
write total lines:
Command [0]
\x20
Command [1]
\x58
write active lines
Command [0]
\x20
Command [1]
\x59
write line start
Command [0]
\x20
Command [1]
\x5a
write period
Command [0]
\x20
Command [1]
\x5b
write total pixels
Command [0]
\x20
Command [1]
\x5c
writeactivepixels
Command [0]
\x20
Command [1]
\x5d
write pixel start
Command [0]
\x20
Command [1]
\x5e
write clamp width
Command [0]
\x20
Command [1]
\x68
144 R5976884 RLM SERIES 04/04/2006