Barco RLM series - Minimum Phase, Read

2. Basic Commands
Example
Reads the actual Phase value of the projector, the awnser being \x1a
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x06
Checksum
\x28
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
Receive (Answer)
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x06
Data [0]
\x1a
Checksum
\x42
Stop
\xff
2.7.35 Minimum Phase, Read
Description
Reads the minimum (range) Phase value of the projector
Command
Command [0]
\x26
Command [1]
\x06
Returned Data
Data [0] = minimum Phase value
Example
Reads
the minimum Phase value of the projector, the awnser being \x00
R5976884 RLM SERIES 04/04/2006
43