Barco RLM series - Color Temperature, Read

2. Basic Commands
Color temperature
Data[0]
Projector white
\x00
Broadcast
\x20
Film
\x36
Video
\x41
Computer
\x5d
If D ata[0] is ommited current used colortemp is returned
Returned Data
Unsigned 2 byte word (msb-lsb).see chapter "1. Serial communications Basics", "Data words", page 6
Data [0] = unsigned byte (msb)
Data [1] = unsigned byte (lsb)
2.32.5 Color temperature, Read
Description
Reads the actual preset color temperature
value from the projector
Commands
Command [0]
\x21
Command [1]
\x45
Returned Data
Data [0] = unsigned byte
data values: \x00 = projector white ; \x20 = bro adca st ; \x36 = Film ;\x41 =Video;\x5D = Com puter ; \xff
=custom
Example
Reads the actual preset color temperature of the projector, the awnser being \x00 =projectorwhite
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x45
Checksum
\x67
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
R5976884 RLM SERIES 04/04/2006 71