Barco RLM series - Brightness, Read; Minimum Brightness, Read

2. Basic Commands
2.7.10 Brightness, Read
Description
Reads the actual Brightness value of the projector
Command
Command [0]
\x21
Command [1]
\x02
Returned Data
Data [0] = Brightness value
Example
Reads the actual Brightness value of the projector, the awnser being \x20
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x02
Checksum
\x24
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
Receive (Answer)
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x02
Data [0]
\x20
Checksum
\x44
Stop
\xff
2.7.11 Minimum Brightness, Read
Description
Reads
the minimum (range) Brightness value of the projector
R5976884 RLM SERIES 04/04/2006
27