Barco RLM series - Lamp Mode, Read

2. Basic Commands
Transmit
Command[0]
\x20
Command[1]
\x0c
Data[0]
\x00
Checksum
\x2d
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
2.30.2 Lamp Mode, Read
Description
Reads the actual Lamp mode of the projector
Command
Command [0]
\x21
Command [1]
\x0c
Returned Data
Data[0]: unsigned byte
data byte value: 0 = Single m od e ; 1= Dual mode
Example
Reads the actual Lamp mode of the projector, the awnser being \x00 = single mode.
Transmit
Start
\xfe
Projector address
\x01
C
ommand[0]
\x21
Command[1]
\x0c
Checksum
\x4
4
Sto
p
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
R5976884 RLM SERIES 04/04/2006 63