Barco RLM series - Pip Window Size, Increment;Decrement; Pip Window Size, Read Min;Max

3. Advanced Commands
Xsize and Ysize determine the size of the window, since the aspect ratio is fixed , one of the values may be
sufficient to determine the siz e of the window.
If the 2 values d o not match the aspect ratio, then Xsize is taken as reference and Ysize is calculated to match
the aspect ratio.
3.2.18 PiP window size, increment/decrement
Description
Increments/decrements the size of the active wiindow (works in PiP and in Full Screen mode)
Command
increment
Command [0]
\x22
Command [1]
\x91
decrement
Command [0]
\x23
Command [1]
\x91
Data
Data[0] = byRepeat (optional)
Note that the panel size (projector versio n) can be read u sing the Panel size command,
3.2.19 PiP Window size, Read Min/Max
Description
Reads the minimum/maximum value for the window size adjustments in PiP.
Commands
read minimum:
Command [0]
\x26
Command [1]
\x91
read maximum:
Command[0]
\x27
Command[1]
\x91
Returned Data
Data[0]...Data[3] = signed double word Xsize : describes the “width” of the window (x axis).
Data[4]...Data[7] = signed double word Ysize : describes the “height” of the window (y axis).
Note that the panel size (projector ve rs ion ) can be read using the Panel size command
104 R5976884 RLM SERIES 04/04/2006