Barco RLM series User Manual

2. Basic Commands
2.4 Projector ON/OFF, Write
Description
Switching ON/OFF the projector
Command
Switching the projector ON
Command [0]
\x65
Switching the projector OFF
Command [0]
\x66
Example
Switches the projector ON
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x65
Checksum
\x66
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
2.5 Projector’s Status, Read
Description
Reads the Projector’s Status
Command
Command [0]
\x67
Returned Data
Data [0] = unsigned byte
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
Not used Not used
Cool down cycle
active = 0
inactive = 1
Not used Not used Not used Textbox
ON = 1
OFF = 0
Projector
ON = 1
OFF = 0
R5976884 RLM SERIES 04/04/2006 19

Barco RLM series Specifications

General

Brand	Barco
Model	RLM series
Category	Projector
Language	English