Barco RLM series - Tint, Write; Tint, Read

2. Basic Commands
2.7.21 Tint, Write
Description
Writes a new Tint value to the projector
Command
Command [0]
\x20
Command [1]
\x04
Data
Data [0] = msb
Data [1] = lsb
type = signed word
Example
Writes a new Tint value of \x20 to the
projector
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x20
Command[1]
\x04
Data[0]
\x00
Data[1]
\x20
Checksum
\x45
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
2.7.22 Tint, Read
Description
Reads the actual Tint value of the projector
Command
Command [0]
\x21
Command [1]
\x04
34 R5976884 RLM SERIES 04/04/2006