Barco RLM series - Show Native Resolution (ON;OFF), Write; Show Native Resolution (ON;OFF), Read

2. Basic Commands
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
Receive (Awnser)
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x0b
Data [0]
\x01
Checksum
\x2e
Stop
\xff
2.24 Show Native resolution (ON/OFF), Write
Description
Enable/disables the native resolution function
Command
Command [0]
\x20
Command [1]
\xaf
Sent Data
Data[0] : one byte : 0 = OFF ; 1 = ON
2.25 Show Native resolution (ON/OFF), Read
Description
Reads whether the native resolution function is enabled or not
Command
Command [0]
\x21
Command [1]
\xaf
Reaturned Data
Data[0] : one byte : 0 = OFF ; 1 = ON
R5976884 RLM SERIES 04/04/2006
59