Barco RLM series - Filmmode Detection, Write; Filmmode Detection, Read

2. Basic Commands
2.38 Filmmode detection, Write
Description
Enables/disables the filmmode detection.
Command
Command [0]
\x20
Command [1]
\xa1
Data
Data [0] = byte type
byte value:
0 = OFF; 1 = ON
Example
Enables the Filmmode detection
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x20
Command[1]
\xa1
Data[0]
\x01
Checksum
\xc3
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
2.39 Filmmode detection, Read
Description
Reads whether the Filmmode detection is enabled or not
Command
Command [0]
\x21
Command [1]
\xa1
R5976884 RLM SERIES 04/04/2006 77