Barco RLM series - Orientation, Read

2. Basic Commands
Transmit
Checksum
\x85
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
2.14 Orientation, Read
Description
Reads the orientation of the projector
Command
Command [0]
\x21
Command [1]
\x24
Returned Data
Data [0] = unsigned byte
byte value:
\x00 =rear/table;\x40 = fron t/t able ; \x80 = front/ceiling ; \xc0 = rear/ceiling
Example
Read the orientation being : \x40 = front/table.
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x21
Command[1]
\x24
Checksum
\x46
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
50 R5976884 RLM SERIES 04/04/2006