Bardac PLX - 7.3 DIAGNOSTICS; FLD I LOOP MONITOR

128 DIA GNOSTICS
FLD I LOOP MO NITOR 3
147)FIELD A CTIVE MON
FLD I LOOP MO NITOR 3
143)FIELD DEM AND M ON
FLD I LOOP MO NITOR 3
144)FIELD CUR % MON
FLD I LOOP MO NITOR 3
145)FLD CUR A MPS MO N
FLD I LOOP MO NITOR 3
146)A NGLE OF A DV A NCE
DIA GNOSTICS 2
FLD I LOOP MO NITOR 3
R R
R
R
7.3 DIAGNOSTICS / FLD I LOOP
MONITOR
PIN number range 143-1 47.
This menu allows monitoring of the parameters
associated with the field control loop.
The motor field current can be read in amps which
alleviates the need to undertake difficult readings
with an ammeter during commissioning
For convenience the field current is also shown as
a % of max rated value in a dedicated windo w.
7.3.1 FLD I LOOP M ONITOR / Field demand monitor PIN 143
7.3.2 FLD I LOOP MO NIT OR / Field current % monitor PIN 1 44
7.3.3 FLD I LOOP M ONITOR / Field current amps monitor PIN 145
FLD I LOOP MO NITOR 3
143)FIELD DEM AND M ON
143)FIELD DEM AND M ON
0.00 %
PARA METER RANGE PIN
FIELD DEM A ND M ON 0.00 to 100.00% 143
Shows the value of the field current
demand as a % of full scale.
R R
FLD I LOOP MO NITOR 3
144)FIELD CUR % MON
144)FIELD CUR % MON
0.00 %
PARA METER RANGE PIN
FIELD CUR % MO N 0.00 to 125.00 % 144
Shows the value of the average DC motor
field current as a % of rated field amps.
R R
FLD I LOOP MO NITOR 3
145)FLD CUR A MPS MO N
145)FLD CUR A MPS MO N
0.00 AMPS
PARA METER RAN GE PIN
FLD CUR A MPS MON 0.00 to 50.0 0 A MPS 145
Shows the value of the average DC motor
field current in amps.
RR