21
Other Connectable devices
There is an increasing number of devices that can be connected to
MC5P. The following list includes connectable devices that are ei-
ther already connectable or will be in soon to come firmware up-
dates (valid when this manual was printed):
• External Pressure Modules (EXT)
• Environment temperature sensor (ENV)
• Battery operated portable printer (COMP/PRT)
• Pressure Controllers: POC4,
Druck DPI510 and Druck DPI 515 (AUX)
• Temperature Baths/Dry Blocks: Isotech,
TekKnow, Ametek/Jofra and HART Scientific (AUX).
Additional information on the battery operated portable printer, pres-
sure controllers and temperature baths/dry blocks is available in
part C of this manual.
Firmware options
The standard firmware shipped with MC5P is capable of performing
all normal measurement, generation/simulation and calibration
tasks. The optional tools give you additional features that enhance
MC5P’s functionality.
The following firmware options are either already available or will
be in soon to come firmware updates (valid when this manual was
printed):
• Special temperature sensors
• Communication with QCAL® software
• Drivers for External Devices that are connected to the AUX
interface.
• HART communication
• Multichannel datalogging
MC5P’s Modularity and Options
To Next Page
Loading...
