BEAMEX MC5P - Measuring the Environment Temperature with the ENV Sensor; Advanced Utilities

75
Advanced Utilities
All the subsequent chapters:
Measuring the Environment Temperature with the ENV
Sensor on page 75,
Display Mode Settings on page 76,
Transmitter/Switch Simulation on page 79,
Data Logging on page 82,
Generating Signals Using External Devices on page 85 and
Printing on page 89
describe the use of additional features that are available in MC5P.
Some of the utilities are firmware options and/or they require some
additional hardware before they can be utilized.
Measuring the Environment Temperature with the ENV Sensor
The ENV-sensor is a optional environment temperature probe that can be connected to
the ENV sensor interface on the left side of MC5P.
Required settings Options/description
Quantity ENV-Temp.
Funct/Port T-ENV(mea) (selected automatically when the
corresponding Quantity setting is activated )
Note!
The ENV-sensor is not accurate enough to be used as a refer-
ence sensor. Use it as a tool for obtaining the environment tem-
perature during calibration or as a temperature measurement tool
when the accuracy of the measurement is not critical.
ELECTRICAL MODULE
FOR MC5P
S/N
MULTIFUNCTION CALIBRATOR
MC5PE
?
ET
ELECTRICAL AND TEMPERATURE MODULE
FOR MC5P
S/N
Max 60 VDC/30 VAC
Max 60 VDC
Max 30 VAC
OUTPUTSENSOR MEASURE & SIMULATE
INTERNAL REFERENCE JUNCTION
FOR THERMOCOUPLES
T/C, Low V
4-w meas
R, RTD
V, I,
3 & 4-w meas
Open
Close
Open
Close
T/C INT. RJ
T/C
WIRES
ONLY
(ENV), ENVIRONMENTAL
TEMPERATURE SENSOR
(EXT), EXTERNAL
PRESSURE MODULE
MEASURE
+24V
I
meas/sink
HART
®
2-w xmtr
V, ,
Low V
Com
Advanced Utilities