32
Startup and Basic Operation
Example of a Basic Mode screen
with pressure measurement config-
ured in Window 1 and current mea-
surement configured in Window 2:
What can be done in Basic Mode
• Measure signals (*
• Generate signals (*
• Simulate signals (*
• Start special measurement (min/max value etc.)
• Perform a Limit Switch Test
• Set alarm limits
• Use the ramping function
• Use the stepping function
*) Available options depend on the installed modules.
Next…
Measuring on page 37
Generating/Simulating on page 54
Special Measurements on page 49
Alarm Limit Settings on page 69
Special Generations on page 65.
10.11.2003 15:04
1
Pressure
2
Current
P2:INT20C/-1.0000...20.6840 bar g
E: Current Measurement
gauge
bar
2.6475
12.4731
Mode
Calibration
MENU
mA
To Next Page
Loading...
