BEAMEX MC5P - Page 81

73
Date Format
A drop down list of available date formats:
dd.mm.yyyy, yyyy.mm.dd and mm.dd.yyyy.
The default format is “dd.mm.yyyy”.
Time Format
A drop down list of available time formats.
24 hour format: h:mm
12 hour format: h:mm am/pm.
The default setting is the 24 hour format.
Language
A drop down list of available User Interface
languages. The default language is En-
glish.
Auto-Off Delay for the Calibrator
Wait time before auto power off is executed.
The default setting is “0” (never).
Auto-Off Delay for the Display Back-
light
Wait time before the display light is auto-
matically switched off.
The default setting is “5 min”.
Setting the time to zero disables display
backlight auto-off.
Volume Settings
MC5P has individual volume settings for the
following sounds:
Sound Default value
*Key Click Medium
*Alarm Medium
*Attention Medium
Outside Span Medium
Error Medium
All settings have three different possible
values (Low, Medium, High). The ones
starting with an asterisk (*) may also be set
to “Off”.
Line Frequency
Select the setting that suits the local line
frequency (50 or 60 Hz).
Note that wrong line frequency setting af-
fects the accuracy of MC5P.
The default setting is “50 Hz”.
Display Backlight Power
Select the backlight power from the avail-
able options:
• Economy
• Normal
• Efficient
The default setting is “Economy”.
ENV Sensor Usage
How the Environment Sensor (ENV) should
be used during calibration. Select one of
the available options:
• Not Used
• Environment
• Instrument
• Both
The default setting is “Both”.
Temperature Unit
Select either °C (Centigrade) or °F (Fahr-
enheit) as the temperature unit.
The default setting is “°C”.
Temperature Scale
MC5P supports the use of both international
temperature scales: ITS90 and the older
IPTS68. Select which one of them is in use.
The default setting is “ITS90”.
Configuring the Calibrator