Boss BR-80 - Page 108

Connecting the BR-80 to a Computer
108
3. Back up or recover your data.
To back up
Double-click the “BR-80 eBand” icon (or the
“removable disk (*:)” icon).
Drag and drop the “ROLAND” folder into a
folder on your computer.
When the backup is completed, the IDLING
screen will reappear.
To recover
Double-click the “BR-80 eBand” icon (or the
“removable disk (*:)” icon).
Delete the “ROLAND” folder in the BR-80.
Drag and drop the “ROLAND” folder onto
the “BR-80 eBand” icon (or the “removable
disk (*:)” icon).
When the recover operation is completed,
the IDLING screen will reappear.
NOTE
• When backing up or recovering,
you must drag and drop the entire
“ROLAND” folder.
If you copy only a portion of the folders,
the data might not be usable on the
BR-80.
• In some cases during the recover
operation, your computer might display
a message asking you to conrm
the overwrite. Choose “YES” for all. If
you choose “No,” the recovery will be
incomplete, and malfunctions might
occur later while operating the BR-80.
• When you recover the data, the data in
the SD card will be overwritten.
4. Stop the connection between the BR-
80 and your computer.
After carrying out the following procedure
on your personal computer, wait until the
IDLING screen has reappeared on the BR-80.
Windows users
From the Windows Start menu, choose
“Computer.”
Right-click the “BR-80 eBand” icon (or
the “Removable disk (*:)” icon), and then
execute “Eject.”
Mac OS users
Drag the “BR-80 eBand” icon to the “Eject”
icon.
5. Turn the BR-80’s power o.
NOTE
The SD card might be damaged if you
fail to stop the connection between
the BR-80 and your computer using the
correct procedure.
6. Disconnect the USB cable.
If you wish to continue using the unit, turn
o the power, then turn it back on again.