Boss BR-80 - SD Card Management and Initialization

Making Overall Settings
115
Viewing SD Card Usage
(SD INFO)
Here’s how to view the usage status of the
SD card.
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to
move the cursor to “FUNCTION,” and
press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to
move the cursor to “SD INFO,” and
press the [ENTER] button.
Parameter Explanation
TOTAL SIZE
Total capacity of the SD
card
REMAIN SIZE
Free space remaining on
the SD card
4. Press the [EXIT] button a number of
times to return to the relevant screen
for the mode you’re in.
Initializing an SD Card
(FORMAT)
NOTE
• When you format a card, the entire
contents of that card will be lost. Be sure
to back up important data before you
continue (p. 107).
• Before you use a commercially available
SD card, you must format it on the
BR-80.
• Make sure that the BR-80’s power is
turned o before you insert or remove
an SD card. Inserting or removing an SD
card while the power is on may destroy
the data on the SD card or damage the
SD card itself.
• Depending on the capacity of the
SD card, formatting may take several
minutes. This does not indicate a
malfunction. Do not turn o the power
until formatting is completed.
• Never remove the SD card or turn o the
power while the message “Keep power
on!” is shown. Doing so will destroy the
data on the SD card or damage the SD
card itself.
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to
move the cursor to “FUNCTION,” and
press the [ENTER] button.
Quick Start Preparations LIVE REC Mode MTR Mode eBand Mode
Convenient Functions
Appendix