Boss BR-80 - Unit Reset and Auto Power Off

Making Overall Settings
116
3.
Use the cursor [ ] [ ] buttons to
move the cursor to “SD FORMAT,” and
press the [ENTER] button.
4. Press the [ENTER] button once again.
A message will ask “Are you sure?”
5. To format the card, choose “YES”
and press the [ENTER] button. If you
decide to cancel, choose “NO” and
press the [ENTER] button.
If you choose “YES” and press the [ENTER]
button, the card will be formatted; you’ll
then be returned to the relevant screen for
the mode you’re in.
Initializing the Unit
(FACTORY RESET)
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to
move the cursor to “FUNCTION,” and
press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to
move the cursor to “F.RESET,” and
press the [ENTER] button.
4. Press the [ENTER] button once again.
A message will ask “Are you sure?”
5. To execute the factory reset, choose
“YES” and press the [ENTER] button.
If you decide to cancel, choose “NO”
and press the [ENTER] button.
If you choose “YES” and press the [ENTER]
button, the factory reset will be executed.
NOTE
After executing the Factory Reset, turn
the BR-80’s power o, then on again.