Boss BR-80 - Detailed Effect Settings; Editing and Saving Insert Effects

110
Detailed Eect Settings
Editing the Insert Eect
Settings (EDIT)
To create a new eect sound, choose an
existing patch that’s close to what you have
in mind, and then edit it. When saving the
edited patch, save it as a user patch or song
patch.
1. Press the [COSM] button.
The eect patch select screen will appear.
2. Select an eect patch (p. 68).
3. Press the [ENTER] button.
4. Use the cursor [ ] [ ] buttons to
move the cursor to “EDIT,” and press
the [ENTER] button.
The EDIT screen will appear.
5. Use the cursor [ ] [ ] buttons to
move the cursor to each eect, and
use the dial to specify the on/o
status of each eect.
Indication Explanation
Eect on (selected)
Eect on
Eect o (selected)
Eect o
6. Use the cursor [ ] [ ] buttons to
move the cursor to the eect whose
parameters you want to edit, and
press the [ENTER] button.
The parameter edit screen for that eect
will appear.
For details on the eect parameters, refer
to “BR-80_Data_List_e.pdf” on the included
SD card.
For details on where “BR-80_Data_List_e.
pdf” is located, refer to “ReadmeEN.txt” on
the included SD card.
7. Use the cursor [ ] [ ] buttons to
select a parameter, and use the dial
to edit its value.
If you want to edit a dierent eect, press
the [EXIT] button to return to the previous
screen, and repeat steps 5–6.
8. Press the [EXIT] button a number of
times to return to the basic screen.
NOTE
If you switch to another eect patch
before saving, the changes you made
will be lost.