Boss BR-80 - Turning the Power off

Getting Ready to Use the BR-80
42
Turning the power o
1. Make sure that song playback is stopped.
2. Turn o the power of any device connected to the PHONES/LINE OUT jack.
3. Make sure that the BR-80’s display does not indicate “Keep power on!”
4. Hold down the top panel’s [ ] button for two seconds or longer; the power will
turn o.
If you don’t want the power to turn o automatically, turn the “AUTO
POWER OFF” setting o
With the factory settings, the BR-80’s power will automatically be switched o 30 minutes
after you stop playing or operating the unit.
If you want to have the power remain on all the time, change the “AUTO POWER OFF”
setting to “OFF” as described on p. 117.
NOTE
• When the power is turned o, any eect settings you were editing will be lost. Before
turning the power o, you must save any settings that you want to keep (p. 111).
Other settings you were editing will be saved automatically when you turn the power
o.
• Auto Power O is enabled when the BR-80 is operating on batteries or the AC adaptor.
This function is deactivated when you’re connected to a computer via USB.
• When multiple power sources are connected, power will be taken in the following order:
the AC adaptor, USB bus power, then batteries.