Boss BR-80 - Exchanging Data (TRACK EXCHANGE); Exchanging Data (EXCHANGE)

Track Editing (TRACK EDIT)
77
1.
Use the cursor [ ] [ ] buttons and
the dial to select the erase-source
track/V-track.
2. Press the [ENTER] button.
The time setting screen will appear.
3. Use the cursor buttons and the dial to
specify the time location.
4. To erase the data, press the [ENTER]
button.
A message will ask “Are you sure?”
If you decide to cancel the procedure, press
the [EXIT] button.
5. Press the [ENTER] button.
The erase will be carried out.
* The display will indicate “Keep power
on!” while the data is being updated.
Do not turn o the power while this
message is shown.
Exchanging Data
(TRACK EXCHANGE)
This operation exchanges data between
two tracks.
Example:
Exchanging the entire contents of tracks 1
and 2
Track 1: Guitar
Track 1: Vocal
Track 2: Vocal
Track 2: Guitar
1. Use the cursor [ ] [ ] buttons
and the dial to select the tracks and
V-tracks that you want to exchange.
2. To exchange the data, press the
[ENTER] button.
A message will ask “Are you sure?”
If you decide to cancel the procedure, press
the [EXIT] button.
Quick Start Preparations LIVE REC Mode MTR Mode eBand Mode
Convenient Functions
Appendix