Brady GlobalMark 2 User Manual

7-4  Adding Objects
The Insert Object screen displays:
These options
available only
on the Color &
Cut system.
Other systems
default to Print
object.
Figure 7-2. The Insert Object screen.
Note that the Insert Object options vary according to your system’s features. The
Monocolor and Multicolor systems do not offer the Cut out object option, so Print
object is assumed and does not appear on the Insert Object screen.
You select options on this screen to choose the kind of label you are going to make,
and to indicate what type of object you want to add. Each type is described in the
sections that follow.
3. If you have the Color & Cut system, choose Print object. All other systems
assume the object is a Print object.
Note: The sections that follow describe Print objects only. To use the Cut out
object option on the Insert Object screen, you must have the Color & Cut
system. See CHAPTER 10: Working with Cut-outs, for instructions.
Adding and formatting text objects
It’s important to understand that when you add a text object, you are not simply
typing text on your label. You create a text object, you type text into the text object,
and you add that text object to your label. This concept is especially useful to
understand for later, when you want to change or edit the objects on your labels.

Brady GlobalMark 2 Specifications

General

Brand	Brady
Model	GlobalMark 2
Category	Label Maker
Language	English