1-2 îš¡ About This Book
About This Book
This manual documents the basic Monocolor printing system, all of whose features
are common to all three systems (described in The three printer systems on
page 1-3).
You’ll also find complete information about the Multicolor system and the Color &
Cut system features and special applications in specially-designated sections and
chapters. This book also provides an appendix listing all special characters you can
use on your labels, and instructions for those of you with the Color & Cut system
about how to maintain your system’s cutter mechanisms.
Features and Functions
Listed below are just some of the features that make this system so easy to use and
ready to meet your label-making requirements:
z Small, lightweight (approximately 30 pounds), ready for your desktop.
z Touch screen LCD display, plus keyboard input for ease of use, with optional
mouse capabilities provided.
z Pre-designed layouts for many standard-use labels included.
z Hundreds of graphics provided for inclusion on your labels.
z QuickText special application for speedy print of text-only labels.
z HotShapes feature for printing non-standard labels of various shapes. Cut-out
capability comes with Color & Cut system.
z Single color job printing at 300 DPI up to 100 mm wide, up to 100 inches (2540
mm).
z Color job printing at 300 DPI, 2 inches (51 mm) to 38 inches (965 mm).
z Tape supplies from .5 (13mm) to 4 (102) inches, in vinyl, polyester,
phosphorescent, reflective, polypropylene, tamper evident, tag stock, brushed
metallic polyester tapes, custom-color vinyl offered.
z Wide variety of monochrome ribbons, panel ribbons in panel lengths of 6 to 16
inches (152 to 406 mm), and CYMK ribbons that blend to make many colors.
z File or graphic transfer from PC available.
To Next Page
Loading...
Need help?
General
