Brady GlobalMark 2 User Manual

Setting Up  2-5
Installing a ribbon cartridge
Figure 2-3. Installing a ribbon cartridge.
Step 1: Hold the ribbon cartridge with the open part of the tab on top and facing you.
Step 2: Place the lower cylinder of the cartridge (with the unused ribbon), in the lower slot
in the cover, as shown.
Step 3: Position the upper cylinder of the cartridge in the upper slot and push gently until
the tab clicks in place.
Your ribbon is now installed.

Brady GlobalMark 2 Specifications

General

Brand	Brady
Model	GlobalMark 2
Category	Label Maker
Language	English