5-8 îš¡ Setting Hardware Tab Options
Setting Hardware Tab Options
Use the Hardware options tab for settings that affect your system’s hardware.
Figure 5-3. The System Setup Hardware tab.
The options are:
Speaker volume
(0-5)
Controls the volume of your system sounds. Enter a
value from 0-5, where 0 turns your sound off
completely.
Check Supply
Colors
When enabled, tells your system to read the current
supply cell. If there are any missing color names,
the system prompts you to supply them. See
Naming supply colors on page 5-9 for instructions.
Cutter Calibration
options appear
only on Color &
Cut system
Unavailable on
the Monocolor
system.
To Next Page
Loading...
Need help?
General
