Brady GlobalMark 2 User Manual

7-36  Changing Objects
Setting options on the Size and Location tab
The Size and Location tab appears on Properties screens of all object types. Use
its options to set the height, width, and location of an object. The following is an
example of a (HotShape) Circle Properties Size and Location tab screen:
Figure 7-19. The Circle Properties Size and Location tab.
To set the size of an object
You can set the absolute size of most objects by setting the height and width on the
Size and Location tab. When you set an absolute size for an object, that object
remains the same size regardless of other operations you perform.
Note: If you previously rotated an object, the Size options are not available on
the Size and Location tab.
1. Select an object.
Select color button For all systems. Select to change colors for the
object. See Applying Color to Objects on page 8-
5.
Note: You may not change the colors of a multi-
color graphic object supplied by the system. You
may, however, change the entire color of a single-
color graphic.

Brady GlobalMark 2 Specifications

General

Brand	Brady
Model	GlobalMark 2
Category	Label Maker
Language	English