Working with Objectsîš¡ 7-31
The object is pasted in the center of display screen. You can move it to any
location on the screen. Use the methods described in
Moving Objects on
page 7-26.
Hint! You can paste multiple instances of an object by repeating Paste or
Ctrl+V.
Changing Objects
You make changes to an object by opening and editing it, or by changing its object
properties.
Opening and editing an object
You must open an object for editing before you can make changes to it.
To open an object
1. With your label displayed in the Editor window, select the object to be edited.
Use any of the methods described in
Selecting Objects on page 7-25.
2. Choose Edit Object on the toolbar, or press Edit Object on the keyboard.
Depending on the type of object selected, you’ll see one these screens:
Text object Enter Text screen, described in Adding and
formatting text objects on page 7-4.
Variable text object Sequence screen, described in Creating sequential
labels on page 7-11, or Text List screen, described
in Creating text list labels on page 7-14, depending
on the type of variable text.
Bar code object Bar Code screen, described in Setting bar code
dimensions on page 7-20
Graphic object Graphics screen, described in Adding graphics
objects on page 7-22.
To Next Page
Loading...
Need help?
General
