Brady GlobalMark 2 User Manual

Setting Up  2-9
Inserting the tape cartridge
Figure 2-7. Installing a tape cartridge.
Step 4: Hold the tape cartridge by the handle with the feet pointed downward and parallel
with the surface the printer is sitting on, as shown in
Figure 2-7. Make sure the tape
extends through the slot in the cartridge.
Step 5: Slowly lower the tape cartridge until the tape roller cylinder ends nest in the
circular slots of the tape receptacle.
.

Brady GlobalMark 2 Specifications

General

Brand	Brady
Model	GlobalMark 2
Category	Label Maker
Language	English