Working with Objectsîš¡ 7-33
The type of system you have also determines the options offered on each tab. For
instance, the Cut out object option does not appear at all on the Properties screens
of the Monocolor or Multicolor systems. Only Color & Cut systems contain the
Cut out object option. Also, some options may be shown on the screen, but appear
to be grayed out, which means they are unavailable for your system or for that
object type.
Hint! For text objects and HotShape objects, you can change a print object to a
cut out object and vice-versa. Go to the General tab on the object’s
Properties screen and choose the appropriate option.
Remember, however, that no object can be both a print object and a cut out
object at the same time, so if you change a print object to a cut out, you
need to change it back again before you can print it again. See
CHAPTER
10: Working with Cut-outs, for more information.
To change object properties
1. With your label displayed in the Editor window, select the object you want to
change, using any of the methods described in
Selecting Objects on page 7-25.
2. Choose Object Properties from the toolbar, or press Object Properties.
Bar Code objects Bar Code Properties screen, with tabs:
General
Size and Location
Font
Placement
Options
Graphic objects Graphic Properties screen, with tabs:
General
Size and Location
Hot Shape objects HotShape Properties screen, labelled according to
the HotShape selected, with tabs:
General
Size and Location
To Next Page
Loading...
Need help?
General
