Brady GlobalMark 2 User Manual

11-22  Printing Tab Options
Figure 11-11 and Figure 11-12 below illustrate how you can save tape with Supply
saver enabled.
Figure 11-11 shows your output with Supply saver enabled and an 8” paneled
ribbon installed. In this job, you want to print three copies of a single label. The
system first checks to see if the labels meet the size criteria. If they do, the system
stacks the labels and prints this output:
Figure 11-11. Sample output with Supply saver ON.
System
shears here
8 inches

Brady GlobalMark 2 Specifications

General

Brand	Brady
Model	GlobalMark 2
Category	Label Maker
Language	English