SETUP SEND 6 - 19
Setup for Polled Transmit with Secure Code
When you choose POLLED TX:SECURE, anyone who polls the
machine must enter the polling ID number.
1
Place the original that is going to be
retrieved face down on the scanner
glass.
2
Press
Menu/Set
,
2
,
2
,
6
.
3
Press to choose SECURE, and press
Menu/Set
.
4
Enter a four-digit number, and press
Menu/Set
.
5
Press
1
if you want to choose more settings and the LCD will
return to the SETUP SEND menu.
—OR—
Press
2
if you have finished choosing settings, and go to step 6.
6
Press
Fax Start
.
7
To send a single page,
press
2
(or press
Fax Start
again).
—OR—
To send more than one page, press
1
and go to Step 8.
8
Place the next page on the scanner
glass.
Press
Menu/Set
.
9
The MFC starts scanning and returns to Step 7. (Repeat Step 6
and 7 for each additional page).
If Real Time Transmission is set to OFF, your original will be
waiting in memory until polled. This information is available for
retrieval by any other fax machine unless it is deleted from the
memory. (See Cancelling a scheduled job on page 6-12.)
You can use Secure Polling only with another Brother fax
machine.
SETUP SEND
6.POLLED TX
NEXT PAGE?
1.YES 2.NO(DIAL)
SET NEXT PAGE
THEN PRESS SET
To Next Page
Loading...
Need help?
General
