SETUP RECEIVE 5 - 13
Sequential Polling
Your MFC can request documents from several fax units in a single
operation. You just specify several destinations in Step 4. Afterward,
a Sequential Polling Report will be printed.
1
Press
Menu/Set
,
2
,
1
,
7
.
2
Press to select STANDARD, SECURE or TIMER.
Press
Menu/Set
when the screen displays the setting you
want.
3
If you selected STANDARD, go to Step 4.
■ If you selected SECURE, enter a four-digit number and press
Menu/Set
, and then go to Step 4.
■ If you selected TIMER, enter the time (in 24-hour format) you
want to begin polling and press
Menu/Set
, and then go to
Step 4.
4
Specify the destination fax machines (up to 150), which you
wish to poll by using Speed Dial, Search, a Group (See Setting
up Groups for Broadcasting on page 7-3) or the dial pad. You
must press
Menu/Set
between each location.
5
Press
Fax Start
.
Your MFC polls each number or group in turn for a document.
Cancelling a job
Press
Stop/Exit
while the machine is dialling to cancel the current
polling process. To cancel all sequential polling receive jobs, press
Menu/Set
,
2
,
6
. (See Cancelling a scheduled job on page 6-12.)
To Next Page
Loading...
Need help?
General
