WALK-UP PHOTOCAPTURE CENTER
™
12 - 20
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the MFC will beep to
get your attention.
MEDIA ERROR
—
This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
NO FILE
—
This message will appear if you select PHOTOCAPTURE
and the media card in the drive (slot) does not contain a .JPG file.
OUT OF MEMORY
—
This message will appear if you are working with
images that are too large for the MFC’s memory.
To Next Page
Loading...
Need help?
General
