5 - 6 SETUP RECEIVE
Fax Detect
When you use this feature, you don’t have to press
Fax Start
or the
Remote Activation Code
5 1
when you answer a fax call and hear
calling beeps. When you see RECEIVING on the LCD or when you
hear “chirps” through the handset of an extension phone connected
to another wall socket, just replace the handset. Your MFC does the
rest. Selecting ON allows the MFC to receive fax calls automatically,
even if you lift the handset of an extension or external phone.
Selecting OFF means you’ll have to activate the MFC yourself, by
pressing
Fax Start
or by pressing
5 1
if you are not at your MFC.
(See Operation from extension telephones on page 5-8 and For
FAX/TEL mode only on page 5-8.)
1
Press
Menu/Set
,
2
,
1
,
4
.
2
Use to select ON or OFF.
Press
Menu/Set
.
3
Press
Stop/Exit
.
If you’ve set the feature to ON, but your MFC doesn’t
automatically connect a fax call when you lift an external or
extension phone handset, press the Remote Activation Code
5 1
.
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set Fax Detect to OFF.
SETUP RECEIVE
4.FAX DETECT
To Next Page
Loading...
Need help?
General
