9 - 1 TAD (TELEPHONE ANSWERING DEVICE)
9
TAD mode
TAD mode allows you to store up to 99 incoming voice messages
that are a maximum of 3 minutes each in a memory. Voice messages
are stored on a “first-come, first-served” basis. You can retrieve voice
messages remotely. (See Remote retrieval on page 8-4.)
You must record an outgoing message in order to use the TAD
mode.
(See Recording TAD Outgoing Message on page 9-2.)
Setting up the TAD
You must set up the TAD in the following order:
1
Record TAD Outgoing Message (TAD MESSAGE).
(See Recording TAD Outgoing Message on page 9-2.)
2
Press and hold until it lights to activate the TAD mode.
(See Activating TAD mode on page 9-4 and Message indicator
on page 9-4.)
TAD (Telephone Answering
Device)
To Next Page
Loading...
Need help?
General
