TAD (TELEPHONE ANSWERING DEVICE) 9 - 8
Record FAX/TEL Outgoing Announcement
(F/T MESSAGE)
This is the announcement played by your MFC (not an external TAD)
when someone calls and your MFC is set to FAX/TEL receive mode.
Although callers hear your announcement, they cannot leave a
message. By choosing F/T MESSAGE (not TAD MESSAGE) you
can record the announcement using the same steps as for the TAD
outgoing message. (See Recording TAD Outgoing Message on
page 9-2.) You can also listen to and erase the F/T MESSAGE the
same way. (See Listening to Outgoing Message (OGM) on page 9-3
and Erasing Outgoing Message (OGM) on page 9-3.)
If you need to review the steps for setting up the FAX/TEL receive
mode, see Chapter 5.
To Next Page
Loading...
Need help?
General
