SETUP SEND 6 - 9
Colour fax transmission
Your MFC can send a colour fax to machines that support this
feature.
However, colour files cannot be stored in the memory, so Delayed
fax and Polling Transmission features are not available.
1
Place the original face down on the scanner glass.
2
Press
Fax Resolution
to select COLOUR STD or COLOUR
FINE.
3
Enter the fax number using the dial pad, Speed Dial or Search.
4
Press
Fax Start
.
Manual and automatic fax redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
, and then press
Fax Start
to try again. If you want
to make a second call to the last number dialed, you can save time
by pressing
Redial/Pause
and
Fax Start
.
Redial/Pause
only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial three times after five minutes.
When you send a colour fax, the MFC will send it in real time.
You cannot send multiple pages.
To Next Page
Loading...
Need help?
General
