INITIAL SETUP 4 - 6
Setting the Ring Volume
1
Press
Menu/Set
,
1
,
4
,
1
.
2
Press to select
(OFF, LOW, MED, or HIGH).
Press
Menu/Set
.
3
Press
Stop/Exit
.
—OR—
You can adjust the ring volume when your MFC is idle (not being
used). You can turn the ring OFF or you can select the ring volume
level.
Press to adjust the volume level. Every time you press a key,
the MFC will ring so you can hear the active setting as the LCD
shows it. The volume changes with each key press. The new setting
will stay until you change it again.
Setting the Beeper Volume
You can change the beeper volume. When the beeper is on, the
MFC beeps every time you press a key or make a mistake and at the
end of sending or receiving a fax.
1
Press
Menu/Set
,
1
,
4
,
2
.
(LOW, MED, HIGH or OFF)
2
Press to select your option.
3
Press
Menu/Set
.
4
Press
Stop/Exit
.
VOLUME
1.RING
VOLUME
2.BEEPER
To Next Page
Loading...
Need help?
General
