REMOTE FAX OPTIONS 8 - 1
8
Setting Fax Storage
If you set Fax Storage to ON, you can use Fax Forwarding to forward
fax messages to another location. Use the Remote Retrieval
commands to get voice and fax messages from your MFC. (See
Remote commands on page 8-5.) The LCD will show when you have
a fax stored in memory.
1
Press
Menu/Set
,
2
,
5
,
2
.
Press to select ON (or OFF).
Press
Menu/Set
.
2
Press
Stop/Exit
.
If you press
1
, all fax data is erased and Fax Storage is turned off.
If you press
2
, faxes are not erased and Fax Storage stays on.
(See Printing a fax from the memory on page 5-10.)
Backup Print
If you’ve set FAX STORAGE to ON, your MFC automatically prints
faxes as they are received into the memory.
This is a safety feature in case the power goes off so you won’t lose
your messages.
Remote fax options
(Not available for colour faxes)
If there are faxes in the memory
when you turn Fax Storage OFF, the
LCD will ask if you want to erase the
faxes from the memory.
REMOTE FAX OPT
2.FAX STORAGE
ERASE ALL DOC?
1.YES 2.NO
To Next Page
Loading...
Need help?
General
