Brother MFC-4820C User Manual

6 - 22 SETUP SEND
Changing the Memory Security Password
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Press to choose
SET PASSWORD.
3
Press
Menu/Set
.
The screen prompts you to enter the
old password.
4
Enter the current password.
5
Press
Menu/Set
.
6
Enter a 4-digit number as a new
password.
7
Press
Menu/Set
.
The screen prompts you to re-enter
the new password.
8
Enter the new password again and press
Menu/Set
.
9
Press
Stop/Exit
.
Switching Memory Security ON
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Press to choose
SET SECURITY.
3
Press
Menu/Set
.
The screen prompts you to enter the
password.
4
Enter a 4-digit password, followed by
Menu/Set
.
This is the same as the security password of the machine
already stored.
The screen displays ACCEPTED for 2 seconds, followed by
SECURE MODE - Memory Security is now switched ON.
If the password you enter at Step 4 is incorrect, the screen
would display WRONG PASSWORD. After 2 seconds the display
will then return to normal (displaying the date & time). You must
then start from Step 1 to set Memory Security.
MISCELLANEOUS
1.MEM SECURITY
MEM SECURITY
OLD PASSWD:XXXX
MEM SECURITY
NEW PASSWD:XXXX
MEM SECURITY
VERIFY:XXXX
MISCELLANEOUS
1.MEM SECURITY
MEM SECURITY
PASSWORD:XXXX

Brother MFC-4820C Specifications

General

Brand	Brother
Model	MFC-4820C
Category	All in One Printer
Language	English